| Range of Gases Detected: |
| Ammonia (NH3 ) |
0 to 100 PPM in 1 PPM increments |
| Carbon Monoxide (CO) |
0 to 300 PPM in 1 PPM increments |
| Chlorine (Cl2 ) |
0 to 10.0 PPM in 0.1 PPM increments
|
| Hydrocarbons |
0 to 100% LEL in 1% increments
0 to 5,000 PPM in 10 PPM increments
0 to 10,000 PPM in 20 PPM increments |
| Hydrogen Sulfide (H2S) |
0 to 200 PPM in 1 PPM increments |
| Oxygen (O2 ) |
0 to 30.0 % VOL in 0.1% increments |
| Sulfur Dioxide (SO2) |
0 to 10.0 PPM in 0.1 PPM increments |
| Sensors: |
|
| Hydrocarbons: |
Catalytic compensated |
| Cl2 , CO, H2S, NH3 , O2
, SO2 : |
Electrochemical |
| Sampling Method: |
Sample-draw, internal pump |
| Response Time: |
90% in 30 seconds
90% in 150 seconds (NH3 ) |
| Accuracy: |
LEL: ?% of reading
O2 : ?.5% VOL
PPM, Cl2 , CO, H2S, SO2 : ?0% of reading
NH3 : ?20% of reading
(when calibrated & maintained according to instruction manual recommendations) |
| Repeatability: |
LEL: ?% of reading
O2 : ?.2% VOL
PPM, Cl2 , CO, H2S, SO2 : ?% of reading
NH3 : ?10% of reading
(when calibrated & maintained according to instruction manual recommendations) |
| Operating Temperature: |
-4°F to 113°F (-20°C to 45°C) |
| Humidity Range: |
0 to 95% RH non-condensing |
| Alarms: |
Audible & visual alarms |
| Display: |
LCD, backlight on demand |
| Power Source: |
Four D alkaline or NiCad batteries |
| Battery Life: |
Alkaline: 20 hours @ 68°F (20°C)
NiCad: 10 hours @ 68°F (20°C)
Due to the nature of alkaline cells, battery life is greatly reduced at low temperatures.
NiCad batteries are recommended for low temperature applications. |
| Controls: |
Six top-mounted buttons |
| Dimensions: |
254 mm (10 in.) L x 152 mm (6 in.) H x 127 mm (5 in.) W |
| Weight: |
Approximately 5 pounds (2.25 kg) |
| Case Material: |
High impact, chemical & RF resistant,
polycarbonate-polyester plastic |
| Intrinsic Safety Rating: |
UL and CSA approved Class I, Division 1, Groups A, B, C, &
D |
| Warranty: |
One year materials & workmanship |
